Advanced Packaging Electrical Integrity Tester

The APEIT advanced packaging electrical integrity test platform features a modular, multi-channel architecture that integrates high-speed signal integrity, power integrity, functional, and panel-level interconnect testing. Fully compatible with probe cards, automated material handling systems (AMHS), and SPC platforms, it supports advanced packaging inspection for CPO, TGV, FOPLP, and AI/HPC applications.

APEIT

Advanced packaging test intelligence

APEIT

Electrical Integrity Technology

  • Multi-channel
  • Modular
  • Production-ready

APEIT translates reference-grade measurement standards established in R&D laboratories into scalable, automated, parallel testing capabilities for production environments. Common control software, LAN and FPGA control, and a dedicated test-system bus integrate signal, power, functional, and panel-level testing.

I-V & TDR Measurement

Measure power and signal paths in parallel.

DC-UP500 characterizes current-voltage behavior, while multi-channel TDR analyzes reflection timing, amplitude, and polarity to locate impedance discontinuities and rapidly identify power- and signal-path abnormalities in production.

 

Tech

Technical overview

From electrical response to actionable defect insight.

A modular, multi-channel architecture converts measurement results into actionable defect categories, physical locations, and process insights.

Multi-channel TDR

Measures line impedance, electrical length, and discontinuity locations while identifying opens, shorts, poor contacts, voids, partially filled vias, and microcracks.

DC-UP500

Supports source-current/measure-voltage, source-voltage/measure-current, and voltage-measurement modes for I, V, R, I-V, leakage, contact, and power-rail analysis.

Optical & Thermal

Integrates optical-power measurement, precision TEC control, water cooling, high-current light-source drivers, and I²C/SPI communication for functional and reliability testing.

ILORA-2000

Adds non-contact laser reflectometry for thickness measurement and detection of layer separation, internal voids, delamination, and microcracks.

Spec

Platform configuration

Scalable specifications for signal, power, and panel-level testing.

Modules can be configured for DUT package format, channel count, line impedance, current and voltage ranges, panel dimensions, and throughput requirements without rebuilding the complete test cell.

Multi-Channel Simultaneous TDR Test System configuration

HIGH-SPEED SIGNAL

Multi-Channel TDR

  • Development Base3.2 Gbps prototype / demo module
  • Target Channels8 channels per module
  • Transition Time40 ps target
  • Delay Resolution2 ps target
  • Signal ModesSingle-ended / differential

DC & POWER

DC-UP500

  • Standard ChannelsUp to 16 channels
  • Standard RangeUp to 512 mA / 12 V
  • High-Current Option2 A / 8 V under development
  • Measurement Modes Source I / Measure V; Source V / Measure I; Voltage
  • Optical ExtensionL-I-V characterization

PANEL-LEVEL TEST

FOPLP Architecture

  • Test Boards48
  • Tester Pins3,072
  • Target Operation30 MHz complete test
  • StructuresRDL / via / bump / interconnect

OPTICAL / THERMAL

NPO Integration

  • Supported Products3.2T / 6.4T optical modules
  • Thermal ControlPrecision TEC / water cooling
  • Optoelectronics Optical power / high-current light-source drive
  • CommunicationI²C / SPI
  1. Control Software
  2. LAN / FPGA Control
  3. Dedicated Test-System Bus
  4. Module / Test Head / Probe or Fixture

One control architecture. Multiple test configurations.

Common software and control architecture manage measurement modules, I/O test heads, probes or fixtures, and automated material handling, allowing the platform to scale with product and throughput requirements.

Use

Application landscape

Electrical integrity across advanced packaging.

From high-speed interconnects and high-current power delivery to optical engines and full panels, APEIT identifies defects before costly downstream processing and improves effective production yield.

CPO / SiPh

High-Speed Signals & Optical Engines

TDR impedance localization, VCSEL and laser-diode drive, L-I-V characterization, and optical-module functional testing.

AI / HPC

High-Current Power Integrity

Analyzes voltage drop, leakage, and contact conditions in AI-package power terminals, micro-bumps, and high-current interconnects.

ABF / Glass / TGV

Substrates & Vertical Interconnects

Detects impedance discontinuities, voids, partially filled vias, and microcracks in ABF, glass-core, and TGV structures.

FOPLP

Panel-Level Known Good Units

Screens RDL traces, vias, bumps, and interconnections before singulation and component assembly.

NPO

Next-Generation Optical Packaging

Combines optical, electrical, thermal-control, and communication functions for multi-site parallel testing of 3.2T and 6.4T modules.

ILORA

Non-Destructive Structural Inspection

Adds thickness, layer-separation, void, delamination, and microcrack information through ILORA-2000 laser reflectometry.

Photonics defect scenarios

Detect defects where they originate.

Covers local cracking after fiber-to-PIC coupling, fiber-array installation stress, thermally induced glass-bridge cracks, hybrid-bonding waveguide damage, and post-reflow bending, fracture, or increased scattering.

  1. Detection
  2. Measurement
  3. Defect Classification
  4. SPC Feedback

From early screening to yield optimization.

Multi-channel automated testing isolates defective areas before singulation, component assembly, and final test, preventing further cost accumulation. Measurement data also supports process comparison, anomaly traceability, and Statistical Process Control.

VIDEO 01

APEIT: Advanced Packaging Electrical Integrity Testing

VIDEO 02

DropTrace™ Lab: Microdispensing & Droplet Measurement

VIDEO 03

CPO Multi-Channel Testing Technology and Applications

VIDEO 04

CPO FAU Micro-Crack Detection and Multi-Channel Inspection

VIDEO 05

TDR: Bare PCB Impedance Testing

VIDEO 06

TDR: Post-SMT PCBA Signal Integrity Testing