Fully Wet Plating and Via Filling Technology

All-wet TGV copper metallization technology overcomes the coverage limitations of conventional PVD/sputtered seed layers in high-aspect-ratio glass vias. Through glass cleaning, surface conditioning, chemical activation, and electroless nucleation, a uniform and continuous metal layer is formed along the TGV sidewalls. Combined with optimized plating chemistry, additives, current waveforms, and flow control, the process enables reliable electrolytic copper via filling. It effectively reduces defects such as voids, seams, and partial fills while improving copper adhesion, fill integrity, and via-to-via consistency. This technology is ideal for glass core substrates, advanced packaging, FOPLP, glass interposers, and high-density TGV arrays.

01

Process Limitations of Conventional TGV Copper Metallization

Conventional TGV copper metallization typically deposits a Ti/Cu seed layer via PVD/Sputtering before electrolytic copper via filling. However, PVD is a directional physical deposition process; as the aspect ratio of glass through-vias increases, metal accumulates primarily at the via entrance and upper sidewalls. This often leaves the central and bottom sections with seed layers that are overly thin, discontinuous, or completely absent. During subsequent electroplating, non-uniform current distribution can lead to premature pinch-off at the entrance, forming defects such as voids, seams, partial filling, or insufficient localized adhesion inside the via.

02

All-Wet Chemical Metallization Technology

All-wet chemical metallization technology eliminates reliance on traditional sputtered seed layers. Instead, through glass cleaning, surface conditioning, chemical activation, and electroless plating nucleation, catalytic activity and the initial metallic layer achieve continuous, highly conformal deposition along TGV sidewalls. Because chemical solutions penetrate deep into high-aspect-ratio through-vias, this overcomes the directional limitations of physical vapor deposition, establishing a complete and uniform conductive foundation for subsequent copper electroplating.

03

Electrolytic Copper Via Filling & Process Control

In the electrolytic copper stage, further optimization of electroplating bath formulations, additives, current waveforms, and fluid dynamics controls enables copper layers to grow uniformly from sidewalls inward to progressively complete void-free via filling. This process effectively minimizes internal voids and seam risks, enhancing copper adhesion, via fill integrity, and via-to-via uniformity—making it particularly suitable for Glass Core Substrates, Advanced Packaging, FOPLP, Glass Interposers, and High-Density TGV Arrays.

Application Areas

Glass Core Substrates
Glass Core Substrate
Advanced Packaging
Advanced Packaging
FOPLP
Fan-Out Panel-Level Packaging
Glass Interposers
Glass Interposer
High-Density TGV Arrays
High-Density TGV Array