MOTION
Six-Axis Positioning
Translational and angular adjustment supports component positioning and optical coupling optimization.
MOL AE Series silicon photonics active alignment systems integrate optical coupling feedback, precision six-axis motion stages, multi-view imaging, and bond-control technology to precisely adjust the position and orientation of photonic chips, fiber arrays, lasers, and lenses, supporting coupling alignment, assembly, and process development for silicon photonics packaging, optical transceiver modules, and micro-optical components.
Align
TechnologyActive alignment uses optical coupling feedback to precisely adjust the position and orientation of optical components, identify the optimal coupling condition, and reduce the impact of assembly errors on optical signal transmission.
Designed for silicon photonics packaging, active alignment models in the MOL AE Series offer single or dual six-axis configurations, using linear stages or high-precision stepper stages depending on the model.
The systems support PIC-to-FAU alignment, laser target alignment, and dual-lens alignment, complemented by near-field and far-field tools.
Core
Technical featuresMotion, imaging, sensing, and software provide a configurable foundation for precision optical packaging.
MOTION
Translational and angular adjustment supports component positioning and optical coupling optimization.
OPTICS
PIC-to-FAU, laser target, and dual-lens alignment address different optical assembly requirements.
VISION
AE Series 2 combines 5 MP cameras, telecentric lenses, and top, bottom, side, and rear views.
SENSING
AE Series 2 integrates confocal displacement sensing and a 1 N load cell for assembly process development.
SOFTWARE
MOL’s in-house alignment software and bond-control technology support customizable process recipes.
BONDING
AE Series 2 includes UV LED control with two irradiation heads; dispensing, NanoStrobeX monitoring, and SMU measurement are optional.
The AE Series 2 mechanism combines dual six-axis linear stages with an XYZ stepper gantry. Multi-view cameras, confocal displacement sensing, and configurable coupling tools support optical component positioning and assembly.
Illustration shows the original Series 2 mechanism; equipment configuration depends on the selected process.
Illustrative workflow. Dispensing and inspection steps depend on the selected configuration and process recipe.
Locate components using product-specific fixtures and imaging.
Adjust position and orientation using optical coupling feedback.
Configure adhesive dispensing and UV curing to suit the assembly.
Apply the available imaging and optional measurement tools.
Spec
Equipment specificationsSelect the motion platform and configuration for the intended optical packaging process. AE Series 2–5 are active alignment models; AE Series 6 is a passive alignment model.
| Model | Alignment type | Motion configuration | Stage type | Listed value | Value definition |
|---|---|---|---|---|---|
| AE Series 2 | Auto-Aligner | Dual 6-axis | Linear stages | ±50 nm | Stage repeatability |
| AE Series 3 | Auto-Aligner | Single 6-axis | Linear stages | ±50 µm | Metric not defined in source |
| AE Series 4 | Auto-Aligner | Single 6-axis | High-precision stepper stages | ±0.1 µm | Metric not defined in source |
| AE Series 5 | Auto-Aligner | Dual 6-axis | High-precision stepper stages | ±0.1 µm | Metric not defined in source |
| AE Series 6 | Passive-Aligner | Dual 6-axis | Linear stages | ±50 nm | Metric not defined in source |
Alignment type
Auto-Aligner
Motion configuration
Dual 6-axis
Stage type
Linear stages
Listed value
±50 nm
Value definition
Stage repeatability
Alignment type
Auto-Aligner
Motion configuration
Single 6-axis
Stage type
Linear stages
Listed value
±50 µm
Value definition
Metric not defined in source
Alignment type
Auto-Aligner
Motion configuration
Single 6-axis
Stage type
High-precision stepper stages
Listed value
±0.1 µm
Value definition
Metric not defined in source
Alignment type
Auto-Aligner
Motion configuration
Dual 6-axis
Stage type
High-precision stepper stages
Listed value
±0.1 µm
Value definition
Metric not defined in source
Alignment type
Passive-Aligner
Motion configuration
Dual 6-axis
Stage type
Linear stages
Listed value
±50 nm
Value definition
Metric not defined in source
Only the AE Series 2 value is explicitly identified as stage repeatability. Other listed values are reproduced from the supplied source; their metrics and test conditions are not defined and should be confirmed before comparison. Stage repeatability is not overall alignment accuracy.
AE 2
Auto-alignerAE Series 2 combines precision motion, multi-view imaging, displacement sensing, and bond-control technology for PIC-to-FAU alignment and optical component assembly.
±50 nm
Stage repeatability
5 MP
Vision cameras
1 µm
Confocal detection value*
| Alignment stages | Dual 6-axis linear stages |
|---|---|
| Stage repeatability | ±50 nm |
| Main gantry | XYZ stepper gantry |
| Displacement sensing | Confocal displacement sensor; 1 µm detection value (not an accuracy specification) |
| Machine vision | 5 MP cameras with telecentric lenses; top, bottom, side, and rear views |
| Load cell | 1 N |
| Control software | Customizable software for user-defined process recipes |
| UV system | UV LED controller with two irradiation heads |
| Coupling tool | Mechanical gripper or vacuum collet |
| Reference dimensions (L × W × H) | 1500 × 1100 × 2100 mm; confirmation required for the redesigned enclosure |
| Epoxy dispensing | Optional jet-valve dispensing system with NanoStrobeX inline epoxy volume monitoring |
|---|---|
| Electrical measurement | Optional SMU units, depending on the product |
Specification notes
* The confocal detection value is stated as in the source and is not an accuracy specification. The source also lists “50 nL” for the inline epoxy monitor without defining the parameter; it is therefore not presented as a resolution, accuracy, or operating range. Dimensions are reference values from the original specification and require confirmation for the redesigned enclosure.
Apply
Process applicationsDesigned for silicon photonics, optical communications, and micro-optical packaging. Combining precision six-axis motion, alignment software, and bond-control technology, the active alignment models support optical component positioning, coupling adjustment, and bonding across five principal application areas.
The original AE Series 2 mechanism illustrates the positioning platform used to develop PIC-to-FAU, laser, and lens assembly processes. Fixtures, optical access, dispensing, and measurement configurations are selected to suit each product.
01 / PIC–FAU
Precisely aligns photonic integrated circuits (PICs) with fiber array units (FAUs). Translational and angular adjustments align the fibers with the chip’s optical coupling interface, supporting coupling optimization and subsequent bonding. This is a core application in silicon photonics module packaging.
02 / TX–RX
Supports positioning and coupling adjustment of Tx/Rx optical subassemblies. Product-specific fixtures and alignment procedures can control the relative positions of fibers, lenses, and other optical components to accommodate different optical transceiver assembly requirements.
03 / OPTICAL PATH
Laser target alignment, dual-lens alignment, and near-field/far-field tools provide a basis for developing collimation, focusing, and fiber-coupling processes. Adjusting lens position, spacing, and orientation helps establish optical paths suited to each product.
04 / BONDING
AE Series 2 incorporates bond-control technology and a UV LED illumination system, with optional jet-valve dispensing and NanoStrobeX inline epoxy volume monitoring. Alignment, dispensing, and curing steps can be configured for the component and adhesive, supporting fixation of fiber arrays, lenses, and other optical components.
05 / DEVELOPMENT
Supports new-product prototyping, fixture development, and alignment recipe creation. AE Series 2 combines multi-view imaging, confocal displacement sensing, and customizable software to observe component positions and assembly conditions. Optional SMU measurement can further support product-specific process development.
Extend
Potential extensionAE Series 2 provides a configurable equipment platform for evaluating precision optical engine assembly processes.
Dual six-axis linear stages offer ±50 nm stage repeatability. 5 MP cameras, telecentric lenses, and confocal displacement sensing support component positioning with top, bottom, side, and rear camera views.
MOL’s in-house alignment software and bond-control technology support user-defined recipes. A load cell, mechanical gripper or vacuum collet, and UV LED controller with two irradiation heads accommodate different assembly and bonding requirements.
Optional jet-valve dispensing, NanoStrobeX inline epoxy volume monitoring, and SMU electrical measurement allow alignment, dispensing, and inspection capabilities to be configured around the intended process.
Potential application
CPO optical engine packaging is presented as a potential extension. Suitability depends on product architecture, fixture design, optical access, and process validation.
Silicon Photonics Active Alignment Demonstration