MATERIAL
Cross-Material Processing Platform
Supports metals, polymers, composites, glass and functional materials, lowering the barrier to introducing new processes across substrates.
LSTR surface engineering and texturing technology fabricates lines, dot matrices, periodic grooves, and hierarchical micro/nanostructures in a single-step process. By tailoring surface topography, it precisely modulates adhesion, wettability, fluidic dynamics, tribological performance, thermal dissipation, and optical properties across metals, glass, ceramics, and composite materials.
LSTR
Technology capabilityHigh-precision laser micro/nanostructuring works across metals, polymers, composites, glass and functional materials. It creates pores, pillars, periodic arrays and ripple structures on diverse substrates while precisely tuning surface functions for each application.
Material versatility
Validated materials include stainless steel, titanium, 100Cr6 steel, aluminum, composites, polycarbonate, polyimide, glass and TiO2. Microstructure dimensions can be tailored to material properties and functional requirements.
Core
Technical featuresFrom material compatibility and structural geometry to functional performance, LSTR uses digital parameter control to deliver repeatable, localized and scalable processing.
MATERIAL
Supports metals, polymers, composites, glass and functional materials, lowering the barrier to introducing new processes across substrates.
SCALE
Adjusts feature size, depth, period and density to material response and application goals for consistent, repeatable surface topography.
GEOMETRY
Creates pores, pillars, grooves, grids, ripples and hybrid arrays for different interface and fluid behaviors.
FUNCTION
Controls wetting, friction, adhesion, optical response and heat transfer through structural parameters to create the required functional interface.
PROCESS
A non-contact, maskless and selective process that shortens changeover time and reduces chemical treatment requirements.
SCALE-UP
Maintains process uniformity through software parameters and scanning strategies, supporting scale-up from localized functionalization to large-area manufacturing.
Surface engineering uses laser micro/nanomachining, texturing and surface-energy modification to create microstructures or localized energy states without altering the bulk material, enabling control of wetting, adhesion, friction, fluid flow and heat transfer.
High-precision lasers accurately control pitch, depth, width, geometry, orientation and density to tune roughness, contact area and droplet contact angle for hydrophilic, hydrophobic or locally wettable surfaces.
Zoned designs can be created on one material: hydrophilic areas guide liquid flow, while hydrophobic boundaries prevent adhesives, inks or functional materials from overflowing. This localized functionalization reduces masks, chemical treatments and added structures for dispensing, inkjet printing, underfill, coating and microfluidics.
Microstructures create mechanical interlocking and anchoring effects that strengthen adhesion of adhesives, coatings, films and composites while improving friction, heat dissipation, flow resistance, boiling nucleation and anti-fouling performance.
LSTR bond-strength engineering uses controllable micro/submicron structures to tune pitch, depth, feature size, pattern geometry and roughness. Increased contact area and mechanical interlocking significantly improve adhesion strength and reliability between dissimilar materials.
LSTR is a non-contact, dry, digital and selective process that optimizes interfaces involving metals, ABF, glass, ceramics, SiC, polymers and composites while preserving both structural bonding and high-frequency signal performance.
LSTR produces lines, dot arrays, pillars, grooves and hybrid microstructures to enlarge the effective contact area between substrates and adhesives, resins, metals or coatings. Selective processing targets fine patterns, RDL, pads or KOZ areas, reducing chemicals, contamination and full-surface roughening while maintaining ABF/Cu signal integrity.
Compared with chemical roughening, mechanical treatment or full-surface plasma, LSTR provides dry, non-contact, maskless and selective processing. Structural parameters can be tailored to bonding materials and integrated with microplasma, surface activation, nanocoatings and electroless plating.
LSTR combines laser microstructuring and surface functionalization to create defined geometries, orientations and wetting patterns that precisely guide, split, confine, block and evenly spread liquids.
By tuning pitch, width, depth, density, orientation, surface energy and contact angle, capillary force, wetting and spreading can be controlled, turning passive surfaces into active fluid-control interfaces.
Fluid-control surfaces combine microgrooves, channels, dot arrays, grids and custom patterns. Directional microchannels accelerate underfill and reduce voids; microstructured boundaries around KOZ areas prevent adhesive overflow; free-form channels route fluids around pads, bumps, sensors and optical components.
The substrate itself controls flow, pinning or repulsion without physical barriers. Software-defined patterns create straight, curved, branched, serpentine or localized channels optimized for different viscosities and dispensing conditions.
LSTR uses a coherent multi-beam laser energy field to rapidly form microchannels, grooves and pillar structures on SiC, ceramics and metals.
Laser interference forms multiple microstructures simultaneously within one beam area, delivering far higher throughput than point scanning. Fine control of pitch, width, depth, orientation, density and roughness optimizes heat-dissipation area, cooling paths, wettability and interfacial heat transfer.
Periodic microchannels, pillars and hybrid geometries turn flat surfaces into high-area heat-transfer interfaces while directing coolant toward hot spots. Enhanced hydrophilicity and capillary action draw coolant into the microstructures to improve liquid cooling, two-phase cooling and boiling heat transfer.
The inherent periodicity of the interference field reliably produces uniform grooves, grids, pillars and honeycomb patterns. Wavelength, interference angle, beam count, pulse energy and scanning strategy can be adjusted to precisely tune structural period and depth for the heat flux and substrate.
LSTR anti-fouling engineering uses micro/submicron structures with defined pitch, depth, width, orientation and density to alter the contact and adhesion of liquids, dust, particles, oils and biological contaminants.
Groove, pillar, dot, grid and lattice configurations tune contact angle, surface energy and fluid spreading to create hydrophobic, hydrophilic, easy-clean or self-cleaning surfaces without compromising substrate durability.
Hydrophobic, hydrophilic, easy-clean or self-cleaning surfaces can be tailored to the operating environment. Micro/nanostructures reduce contaminant contact area, allowing rolling or spreading droplets to remove dust, oil and residue. In biological applications, these structures inhibit early adhesion of bacteria, proteins and biofilms and can be enhanced with plasma or functional coatings.
Unlike conventional chemical coatings that wear or peel over time, laser anti-fouling engineering builds functionality directly into the substrate. Localized processing can integrate optical, frictional, thermal and surface-durability requirements.
Modular surface functionalization solutions covering IR, VIS, and UV spectral ranges, providing flexible micro-structural pattern and process configurations.
| Working Distance | 20–35 mm |
|---|---|
| Pulse Duration | > 1 ps |
| Dimensions (W×D×H) | 350 × 170 × 125 mm |
| Weight | 3.5 kg |
| Model | Wavelength (nm) | 4-Beam Period (μm) | 2-Beam Period (μm) | Pattern Type | 2-Beam Efficiency |
|---|---|---|---|---|---|
| IR50.4 | 1064 | 2.0–10.4 | 1.5–7.3 | dots / lines | 50% |
| IR50.2 | 1064 | — | 1.5–7.3 | lines | 100% |
| VIS50.4 | 532 | 1.4–6.0 | 1.0–4.2 | dots / lines | 50% |
| VIS50.2 | 532 | — | 1.0–4.2 | lines | 100% |
| UV50.4 | 355 | 1.0–4.4 | 0.7–3.1 | dots / lines | 50% |
| UV50.2 | 355 | — | 0.7–3.1 | lines | 100% |
Modular high-speed surface functionalization solution incorporating scanner-based interference modules, combining high processing throughput, pattern flexibility, and precise energy input.
| Scan Speed | < 6 m/s |
|---|---|
| Pulse Duration | > 1 ps |
| Dimensions (W×D×H) | 410 × 160 × 470 mm |
| Model | Wavelength (nm) | Structure Period (μm) | Pattern Type | 2-Beam Efficiency | Working Distance (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| IR30.4 | 1064 | 4.2–30 | dots / lines | 50% | 170 | 20 |
| IR30.2 | 1064 | 4.2–19 | lines | 100% | 170 | 18 |
| VIS30.4 | 532 | 2.5–8.5 | dots / lines | 50% | 100 | 20 |
| VIS30.2 | 532 | 2.5–6.0 | lines | 100% | 100 | 18 |
| UV30.4 | 355 | 1.3–7.1 | dots / lines | 50% | 170 | 20 |
| UV30.2 | 355 | 1.5–5.0 | lines | 100% | 170 | 18 |
Utilizes regularly arranged micro-groove or micro-pillar arrays to achieve precise control over fluids, friction, thermal dissipation, and optical beam behaviors.
Creates randomized micro-roughened surfaces to expand effective interfacial contact area, thereby maximizing bonding strength and connection reliability.
Enhances adhesion performance for copper layers, Redistribution Layers (RDL), ABF substrates, and encapsulating materials.
Induces a mechanical anchoring effect to significantly boost joint strength across metals, polymers, and structural adhesives.
Leverages micro-grooves to guide droplet movement, enabling tailored control over hydrophilicity, hydrophobicity, and flow vectors.
Engineers micro-pillars or micro-channels to enlarge effective heat transfer area and optimize coolant fluid dynamics.
Stores lubricant in micro-dimples to reduce mechanical friction, wear, and component degradation.
Minimizes glare and surface reflections, increasing light absorption or total optical transmittance.