High-Speed Precision Laser Processing

High-speed precision laser processing technology integrates beam shaping, galvo scanning, high-precision motion control, and vision alignment to achieve micro-drilling, cutting, selective material ablation, and surface texturing—delivering high throughput, high precision, minimal heat-affected zones (HAZ), and superior mass-production consistency.

MOL High-Speed Precision Laser Manufacturing Technology & Advantages

MOL High-Speed Precision Laser Manufacturing Technology & Advantages

With Laser–Material Interaction at its technical core, MOL Solutions integrates advanced laser sources, optical design, beam shaping, high-precision motion platforms, galvo/scanners, encoders, vision systems, and high-speed synchronized control software. This forms a complete capability spanning process development, measurement validation, and mass-production equipment integration.

Targeting advanced materials such as glass, SiC, ceramics, metals, PI, ABF, and polymers, MOL precisely tailors laser wavelength, pulse duration, energy density, repetition rate, focal position, and scanning paths based on material properties. This enables micro-drilling, precision cutting, selective material removal, and high-aspect-ratio 3D microstructures. By controlling ablation thresholds and energy distribution, heat-affected zones (HAZ), micro-cracks, debris, recast layers, and thermal deformation are effectively minimized, while enhancing sidewall perpendicularity, surface quality, and processing consistency.

In high-speed manufacturing, the MOL platform achieves ~1 μm repeatable positioning accuracy and 1–1.5 G acceleration, drastically reducing move-and-settle times between process points. Its TGV technology utilizes temporal pulse shaping to form initial through-holes in a single pulse—reaching design speeds up to ~20,000 vias/sec. Combined with uniform chemical etching, it balances high throughput, vertical hole profiles, and thick glass processing quality. Furthermore, paired with LSTR laser interference technology, it enables large-area periodic micro/nano-structure fabrication at speeds up to ~3 m²/min. MOL’s core advantage lies in merging high speed, high precision, low thermal damage, real-time inspection, and smart control into repeatable, traceable, and production-ready manufacturing solutions.

High-Speed Precision Motion Platform

High-Speed Precision Motion Platform

MOL’s core strength in custom optical design and beam shaping lies in re-architecting laser energy distribution across spatial, temporal, and depth dimensions according to specific material, feature size, and quality requirements—rather than merely routing standard laser sources into processing equipment. Utilizing DOEs, Bessel beams, Top-hat beams, Axicons, multi-beam optics, and specialized focusing systems, MOL converts conventional Gaussian beams into optimized beam profiles, precisely controlling spot size, energy uniformity, depth of focus (DOF), and interaction zones.

Top-hat beams enhance energy uniformity within the processing area, mitigating central over-ablation and edge under-processing. Bessel beams and extended-DOF optics excel in processing thick glass, TGV, and high-aspect-ratio structures by boosting axial process stability. Multi-beam and laser interference techniques simultaneously generate multiple processing sites or periodic micro/nano-structures, dramatically elevating production efficiency.

In beam delivery control, MOL further synchronizes galvo/scanners, precision motion stages, encoders, vision systems, and laser pulse timing—ensuring tight harmony across beam position, focus, power, scanning speed, and trajectory. Integrated autofocus, beam alignment, and in-line metrology compensate for stage errors, material height variations, and thermal drift during continuous operation. The primary advantage is simultaneously delivering high speed, high precision, minimal thermal impact, process consistency, and flexibility, allowing rapid establishment of verified, repeatable, and scalable laser processes for glass, SiC, ceramics, copper, PI, and ABF.

Custom Optical Design, Beam Shaping & Beam Control Advantages

Custom Optical Design, Beam Shaping & Beam Control Advantages

MOL’s core strength in custom optical design and beam shaping lies in re-architecting laser energy distribution across spatial, temporal, and depth dimensions according to specific material, feature size, and quality requirements—rather than merely routing standard laser sources into processing equipment. Utilizing DOEs, Bessel beams, Top-hat beams, Axicons, multi-beam optics, and specialized focusing systems, MOL converts conventional Gaussian beams into optimized beam profiles, precisely controlling spot size, energy uniformity, depth of focus (DOF), and interaction zones.

Top-hat beams enhance energy uniformity within the processing area, mitigating central over-ablation and edge under-processing. Bessel beams and extended-DOF optics excel in processing thick glass, TGV, and high-aspect-ratio structures by boosting axial process stability. Multi-beam and laser interference techniques simultaneously generate multiple processing sites or periodic micro/nano-structures, dramatically elevating production efficiency.

In beam delivery control, MOL further synchronizes galvo/scanners, precision motion stages, encoders, vision systems, and laser pulse timing—ensuring tight harmony across beam position, focus, power, scanning speed, and trajectory. Integrated autofocus, beam alignment, and in-line metrology compensate for stage errors, material height variations, and thermal drift during continuous operation. The primary advantage is simultaneously delivering high speed, high precision, minimal thermal impact, process consistency, and flexibility, allowing rapid establishment of verified, repeatable, and scalable laser processes for glass, SiC, ceramics, copper, PI, and ABF.

MOL precision processing equipment

Machine Features

  • Surface modification and microvia drilling
  • Tailored surface functionality through biomimetic engineering
  • High-speed, high-precision through-hole processing
  • Short processing cycle times for inline production
  • Advanced process optimization with real-time learning and correction

Motion Stage Specifications

X / Y Axis Specifications

ParameterValueUnit / Condition
X-Axis Travel620mm
Y-Axis Travel700mm
Maximum Velocity1.5m/s
Maximum Acceleration1G
Repeatability±0.5µm
Accuracy±1µm
Flatness±1.5µm
Pitch / Roll / Yaw2arc sec
Orthogonality<±1arc sec
Position Stability±100nm
Position Following Error≤1µm @ 15 mm/s

Z / R Axis Specifications

ParameterValueUnit
Z-Axis Travel620mm
Maximum Velocity1.5mm/s
Maximum Acceleration1mm/s2
Repeatability±0.5µm
Accuracy±1.0µm
Straightness±1.5µm
R-Axis Travel620°
Maximum Rotational Speed1.5RPM
Repeatability±0.5arc sec
Accuracy±1.0arc sec
Axial Error±1.5µm
Radial Error±1.5µm

On narrow screens, scroll horizontally within each table to view all specifications.

Precision Laser Processing & Process Quality Control

Process Stability Control

Precise energy input and thermal effect management to suppress material damage and instabilities, ensuring process consistency.

Laser Ablation Threshold Control

Accurate control of energy input and heat management to suppress material damage and maintain stable processing.

Heat-Affected Zone (HAZ) Control

Minimizes thermal dissipation and heat depth to preserve structural integrity and dimensional precision.

Micro-crack Suppression

Reduces heat spread and thermal penetration depth to maintain structural integrity and machining accuracy.

Debris & Recast Layer Suppression

Optimizes laser energy and scan parameters to mitigate debris adhesion and recast layers, elevating surface quality.

 

Precision Geometry & Surface Quality Control

Precise geometric dimensioning and surface finishing to realize micro/nano-structures with high consistency and repeatability.

Hole Wall Taper Control

Hole Wall Taper Control

Precise taper angle management to achieve highly vertical sidewall structures.

Sidewall Roughness Control

Sidewall Roughness Control

Fine-tunes processing energy and parameters to obtain low-roughness sidewalls, boosting surface quality and reliability.

Precision Depth Control

Precision Depth Control

Delivers highly consistent depth control to satisfy microstructural and functional processing requirements.

 

Advanced Material Processing Capabilities

Enables selective material removal and complex structural machining across multi-material and diverse industrial applications.

Selective Material Removal

High-precision selective processing tailored to various materials for complex 3D microstructures.

High-Quality Precision Laser Manufacturing Results

High-Quality Precision Laser Manufacturing Results

Combines high accuracy, quality, throughput, and reliability for stable and uniform precision manufacturing.